ss304 full-scale package water purification plant

Applicable water quality range

The integrated fully automatic water purification equipment is suitable for Class I, II, and III river water, mountain spring water, reservoir water, pond water, groundwater, etc. with raw water turbidity<3000NTU; After treatment, it meets the relevant water quality indicators of GB5749-2022, the Hygienic Standards for Drinking Water; Can be used as pre-treatment equipment for high-purity water, beverage industry water, boiler water, etc.

Integrated fully automatic water purification equipment purification process

1. Coagulant dosage:

According to the turbidity of the raw water, use a dosing device to evenly mix the coagulant into the pipeline mixer.

2. Coagulation and sedimentation:

Suspended solids and colloidal particles in water generate coarse alum flowers for automatic precipitation, achieving solid-liquid separation, reducing the burden of filtration, and saving backwash water consumption.

3. Filtering:

The residual small alum flowers are intercepted by the filter layer, resulting in a turbidity of 0.4~1 NTU in the effluent;

The filter layer is composed of 4-7 different media filter media, which can trap solid particles in the filter layer and achieve a cleaning rate of over 98%.

4. Disinfection:

After being disinfected by an electrolytic sodium hypochlorite generator, it flows into a clean water tank.

5. Automatic backwashing:

The increase in the interception capacity of the filter layer causes the water level to rise. When the design requirements are met, a bottom-up backwash is carried out, and the filtration is automatically restored after the flushing is completed.The backwash water is provided by the filter water tank, with a backwash strength of 8-66l/s · m ², The recoil takes 3-6 minutes.

Equipment Selection Parameter Table