SS304 dosing system modular water treatment systems

Integrated fully automatic water purification equipment can produce water purification equipment of different materials such as stainless steel and carbon steel according to user needs.

Main technical parameters of the equipment

Raw water turbidity: ≤ 1500 mg/L, short-term up to 3000 mg/L

Turbidity of effluent: ≤ 1NTU (in special cases ≤ 3NTU)

Reaction time: 10-20 minutes

Steady flow zone flow rate: 1.8-2.7 millimeters/second

Rinsing intensity: 14-16 liters/square meter • second

Rinsing time: 2-8 minutes

Inlet water head: ≥ 8 meters

Equipment characteristics

The main characteristics of the integrated fully automatic water purification equipment are as follows:·

1. Integrating flocculation and sedimentation, aeration, filtration, automatic backwashing, and sewage discharge, saving over 60% of land and construction costs;

2. Automatic operation does not require electricity, manual control, or dedicated management, saving over 80% of electricity bills;

3. Multi medium composite filter layer, with a removal rate of over 99% for organic matter and suspended solids, and can also remove iron and manganese ions. The effluent turbidity is 0.4~1 NTU, which meets the requirements of drinking water hygiene;

4. No dead corners for backwashing, the filter layer will not harden, and there is no need for replacement or manual cleaning, saving an annual maintenance fee;

5. 304 stainless steel material has high strength, is not corrosive, and is resistant to aging, preventing rust and rust water. It can be used for more than 30 years (or carbon steel equipment can be produced as needed);

6. Optional automation control system, water quality online monitoring system, and smart water management system can be equipped to achieve automation, intelligence, and intelligent management of water plants.

7. The effluent meets the requirements of drinking water standards

Integrated fully automatic water purification equipment has been widely used in drinking water projects in more than 10 provinces; The effluent has been tested by a professional organization and meets the relevant indicators of the GB5749-2022 Sanitary Standard for Drinking Water. The turbidity of the effluent is ≤ 1 NTU.

Equipment Selection Parameter Table